Onkyo HT-S4100 Instruction Manual page 38

First Time Setup—Continued
ON/STANDBY
GUIDE
TOP MENU
SP A / B
2–8
RETURN
RETURN
STEREO
AUDIO
TEST TONE
DISPLAY
Speaker Configuration setting only need to be
changed if you're not using the speakers in
this package.
These settings cannot be changed while head-
phones are connected, speaker set B is on, or
the multichannel DVD input is being used.
38
REMOTE MODE
RECEIVER DVD
TAPE
INPUT SELECTOR
C D
1 2 3
V 1 V 2 V 3
MD
4 5 6
MULTI CH DVD
7 8 9 CDR
TAPE TUNER C D
+ 10
0 CLR HDD
--/--- DIMMER SLEEP
CH
VOL
DISC
ALBUM
PREVIOUS
MENU
MUTING
ENTER
PLAYLIST PLAYLIST
SETUP
LISTENING MODE
SURROUND
SUBTITLE RANDOM REPEAT
LEVEL - LEVEL +
CH SEL
PLAY MODE
L NIGHT CINE FLTR
RC - 645 S
Speaker Configuration
This section explains how to specify your speaker con-
1
figuration.
For speakers with a cone diameter
larger than 6-1/2 inches (16 cm),
specify Large (full band). For those
with a smaller diameter, specify
Small (default crossover 100 Hz).
The crossover frequency can be
changed on page 55.
1
RECEIVER
1, 9
SETUP
2
ENTER
3
4
Cone diameter
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
Use the Up and Down [
buttons to select "1. SP Config,"
and then press the [ENTER] but-
ton.
While the Subwoofer setting is
selected, use the Left and Right
[ ]/[ ] buttons to select Yes or
No.
Yes: Select if a subwoofer is con-
nected.
No: Select if no subwoofer is con-
nected.
Use the Down [ ] button to
select "Front," and then use the
Left and Right [ ]/[
select Small or Large.
Small: Select if the front speakers are
small.
Large: Select if the front speakers are
large.
Note:
• If the Subwoofer setting in step 3 is
set to No, this setting is fixed at Large
and does not appear.
]/[ ]
] buttons to