Advertisement
QUICK SETUP
Model : HT-S4100
Thank you for purchasing this product.
This quick setup sheet shows the typical hookup method for connecting
speakers and AV components (DVD player, TV, cable/satellite receiver).
For more detailed hookup information and operating instructions,
please see the Instruction Manual.
First of all,
turn on speaker set A.
Press the SPEAKERS [A] button on
the front panel. Make sure that speaker
indicator A is shown on the display.
Turn off speaker set B when not in use.
Indicator should be off.
Speaker Set A Layout (Main Room)
Front
Left
Surround
Left
A SPEAKERS B
A
B
TV
Front
Right
Center
Surround
Listener
Right
Speaker Set A Hookup
Front right
speaker
Center
speaker
GREEN/BLACK
CABLE
RED/BLACK
CABLE
TX-SR304
GRAY/BLACK
CABLE
Powered
Surround right
speaker
subwoofer
See the other side of this sheet for the AV component hookup.
(C) Copyright 2008 ONKYO CORPORATION Japan. All rights reserved.
Front left
speaker
WHITE/BLACK
CABLE
BLUE/BLACK
CABLE
Surround left
speaker
SN 49344693
* 4 9 3 4 4 6 9 3 *
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Onkyo HT-S4100
Summary of Contents for Onkyo HT-S4100
-
Page 1: Quick Setup
Center Surround Listener Left Front right speaker A SPEAKERS B Front Right Surround Right Powered subwoofer (C) Copyright 2008 ONKYO CORPORATION Japan. All rights reserved. Speaker Set A Hookup Center speaker GREEN/BLACK CABLE RED/BLACK WHITE/BLACK CABLE CABLE TX-SR304 BLUE/BLACK CABLE... -
Page 2: Dvd Player
AV Component Hookup DIGITAL AUDIO VIDEO COAXIAL DVD player Assigning the Digital Input If there's no sound, press the [DIGITAL INPUT] button repeatedly until sound is heard. The digital input is now properly assigned. If you connect your DVD player to the AV receiver's COAXIAL DIGITAL IN, and your cable/satellite receiver to the OPTICAL 1 DIGITAL IN, as shown, it's not necessary to assign the digital input.
Need help?
Do you have a question about the HT-S4100 and is the answer not in the manual?
Questions and answers