By follow- ing these instructions, you’ll get the best audio performance and the most listening pleasure from your Onkyo product. Keep this manual for future reference. * iPod is a trademark of Apple Inc., registered in the U.S.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safety Instructions 1.
We, ONKYO EUROPE ELECTRONICS GmbH LIEGNITZERSTRASSE 6, 82194 GROEBENZELL, GERMANY declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3. GROEBENZELL, GERMANY...
Getting Started About the RI Dock With the Onkyo RI Dock, you can easily play the music stored on your Apple iPod through your Onkyo audio system and enjoy great sound. You can use your Onkyo amp’s remote control- ler to operate your iPod.
Getting Started —Continued Getting to Know the RI Dock iPod adapter iPod connector Power indicator TAPE AV receiver/Amp input display TAPE TAPE RI MODE switch See your AV receiver/amp’s instruction manual for details on changing the input display. On some amps, you press and hold the [TAPE] button to change the input display from TAPE to MD, CDR, HDD or Dock.
Getting Started —Continued Hooking Up the RI Dock Depending on the Onkyo AV receiver/amp that you’re using, choose connection method A or A: Connect the RI Dock’s AUDIO OUT L/R jacks to an RI Dock-compatible input on your Onkyo AV receiver/amp. (You might need to change the input display to “HDD”...
Using the RI Dock Putting Your iPod in the RI Dock 1. Plug in the AC adapter. 2. Turn on your AV receiver/amp, and select the appropriate inputs on your AV receiver/amp. 3. Align your iPod with the RI Dock’s iPod slot, and carefully place your iPod in the slot, as shown.
Using the RI Dock —Continued Operating Notes: • The RI Dock must be connected to your AV receiver/amp with both an and an audio cable to use the tions. • If your AV receiver/amp doesn’t support the System On, System Off, Auto Power On, and Direct Change functions, you’ll need to turn your AV receiver/amp on and off and select the input source man-...
Rewind — * To select the next or previous photo in an iPod photo slideshow, use the controls on your iPod photo. The following functions can be used with some Onkyo amps. Remote controller button to use iPod function TAPE mode MD mode CDR mode HDD mode [DOLBY Shuffle...
Troubleshooting ■ There’s no sound • Make sure your iPod is actually playing. • Make sure your iPod is inserted properly in the RI Dock. • Make sure the RI Dock is connected to the correct input jacks on your AV receiver/amp. Do not con- nect it to any output jacks.
June 2007, and may change with future upgrades to the iPod software. • The AC adapter supplied with the DS-A1XP is designed exclusively for use with the DS-A1XP. Do not use it with another device. Likewise, do...
Page 12
Unit 1&12, 9/F, Ever Gain PlazaTower 1, 88, Container Port Road, Kwai Chung, N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.ch.onkyo.com/ I0803-1 SN 29344822 (C) Copyright 2008 ONKYO CORPORATION Japan. All rights reserved. * 2 9 3 4 4 8 2 2 *...
Need help?
Do you have a question about the DS-A1XP and is the answer not in the manual?
Questions and answers