Cooling System Maintenance; Removing Debris From The Cooling System - Toro 30859N Operator's Manual

Traction unit
Table of Contents

Advertisement

Cooling System
Maintenance
Removing Debris from the
Cooling System
Remove debris from the screen, oil coolers, and radiator daily
(clean more frequently in dirty conditions).
1. Turn the engine off and remove the key from the
ignition switch.
2. Thoroughly clean all debris out of the engine area.
3. Unlatch the clamp and pivot open the rear screen
(Figure 45).
Figure 45
1. Rear screen latch
4. Clean the screen thoroughly with compressed air.
5. Pivot the latches inward to release the oil cooler (Figure
46).
2. Rear screen
1. Oil cooler
6. Thoroughly clean both sides of the oil cooler and the
radiator (Figure 47) with compressed air.
1. Radiator
7. Pivot the oil cooler back into position and secure the
latches.
8. Close the screen and secure the latch.
36
Figure 46
2. Oil cooler latches
Figure 47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Groundsmaster 4300-d

Table of Contents