Important: Running the engine with the bypass
valve open will cause the transmission to overheat.
Jacking Points
Note: Use jack stands to support the machine when required.
•
Front—rectangular pad, under the axle tube, inside each
front tire (Figure 20).
1. Front jacking point
•
Rear—rectangular axle tube on the rear axle.
Tie Downs
•
Front—the hole in the rectangular pad, under the axle
tube, inside each front tire (Figure 21).
Figure 20
1. Front tie down
•
Rear—each side of the machine on the rear frame (Figure
22).
1. Rear tie down
23
Figure 21
Figure 22