1. Connection to the network
1.1.2 Hardware and software requirement for computer
To connect your computer to the projector and use the network function of the
projector, your computer needs to meet the following requirements.
OS: One of the following.
®
XP Home Edition /Professional Edition
Windows
Windows Vista
7 Starter /Home Basic /Home Premium /Professional /Ultimate /
®
Windows
Enterprise
8 /8.1
®
Windows
®
8 /8.1 Pro/Enterprise
Windows
CPU: Pentium 4 (2.8 GHz or higher)
Graphic card: 16 bit, XGA or higher
* When using the "LiveViewer" it is recommended that the display resolution of
your computer is set to 1024 x 768.
Memory: 512 MB or higher
Hard disk space: 100 MB or higher
Web browser: Internet Explorer
CD-ROM/DVD-ROM drive
NOTE
• The network communication control is disabled while the projector is
in standby mode if the STANDBY MODE item is set to SAVING. Please connect
the network communication to the projector after setting the STANDBY MODE
to NORMAL. (SETUP menu in the Operating Guide)
• Although HDBaseT and LAN port can be used for wired LAN, they cannot be
used simultaneously. Connect LAN cable to the port set in WIRED NETWORK
on NETWORK menu.
• You can get the latest version of the applications for the network functions of
the projector and the latest information for this product from the Hitachi website.
(http://www.hitachi-america.us/projectors or http://www.hitachidigitalmedia.com).
1.2 Quick connection
The "LiveViewer" supports very quick and simple connection to the network.
When making use of the network function, it is recommended that you install the
"LiveViewer" on your computer. For details, refer to the manual for "LiveViewer".
In case you don't want to use the "LiveViewer" or you cannot use it by some
reason, proceed to the manual setting, the item 1.3 for the wired LAN (7) and
the item 1.4 for the wireless LAN. (11)
6
Home Basic /Home Premium /Business /Ultimate /Enterprise
®
®
6.0 or higher