Security Settings - Hitachi CP-WU8451 User Manual

3.1 Projector Web Control (continued)

3.1.9 Security Settings

Item
User Account
User name
Password
Re-enter Password
Network Control
Authentication
Password
Re-enter
Authentication
Password
SNMP
Community name
Click the [Apply] button to save the settings.
NOTE
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection from
Network Restart on the main menu. (42)
• Only numbers '0-9' and alphabet 'a-z', 'A-Z' can be used.
Displays and configures passwords and other
security settings.
Configures the user name and password.
Configures the user name.
The length of the text can be up to 32 alphanumeric
characters.
Configures the password.
The length of the text can be up to 255 alphanumeric
characters.
Reenter the above password for verification.
Configures the Authentication password for Network Control
Port1 (Port: 23), Network Control Port2 (Port: 9715),
PJLink™ Port (Port: 4352), My Image Port (Port: 9716),
and Messenger Port (Port: 9719). (23, 24)
Configures the Authentication password.
The length of the text can be up to 32 alphanumeric
characters.
Reenter the above password for verification.
Configures the community name if SNMP is used.
Configures the community name. The length of the text can
be up to 64 alphanumeric characters.
Description
3. Web Control
33