Replacing The M.2 Wi-Fi Antennas - Lenovo ideacentre 200 Hardware Maintenance Manual

7. Insert a new M.2 Wi-Fi card module into the M.2 Wi-Fi card slot. Then, pivot
the M.2 Wi-Fi card module downward.
Note: Do not touch the notched edge of the M.2 Wi-Fi card module.
Figure 30. Installing the M.2 Wi-Fi card module
8. Install the screw to secure the M.2 Wi-Fi card module into the system board.
Then, connect the M.2 Wi-Fi antenna cables to the M.2 Wi-Fi card module.
Figure 31. Connecting the M.2 Wi-Fi antenna cables
9. Reinstall the system board frame. See "Replacing the system board frame"
on page 88.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts
replacement" on page 107.

Replacing the M.2 Wi-Fi antennas

Attention:
Do not open your computer or attempt any repair before reading and
understanding the Chapter 1 "Read this first: Important safety information" on
page 1.
98
ideacentre 200 Hardware Maintenance Manual