TP-Link Archer VR900 User Manual page 76

Chapter 12
2 Press the WPS button of the client device directly.
3 The WPS LED flashes for about 3 minutes during the WPS process.
4 When the WPS LED is on, the client device has successfully connected to the
modem router.
Method 2 Enter the client device's PIN on the modem router
1 Visit http://tplinkmodem.net, and log in with the password you set for the modem
router.
2
Go to Advanced >
according to your wireless client.
3 Keep the default WPS status as Enabled and select the
4 Enter the client device's PIN in the field on the above WPS screen. Then click the
Connect button.
Wireless >WPS page. Select the wireless network 2.4GHz or 5GHz
Specify Your Network Settings
PIN Code radio button.
72