Set Up An Ipv6 Connection - TP-Link Archer VR900 User Manual

Chapter 4
2 Go to Basic > Internet
will be automatically filled in. Enter the information provided by your ISP for the
Connection Type. If you can't find your ISP in the
enter the information provided by your ISP.
3 Click Save to make the settings effective and you can refer to
to test the Internet connection.
Tips: You can view and edit all Internet connections on
4 3

Set up an IPv6 Connection

If the DSL line your ISP provided also supports IPv6 connection and your ISP has
provided some detailed IPv6 parameters, you can configure the modem router to
permit IPv6 connection.
Follow the steps below to set up an IPv6 connection.
1
Configure the WAN settings.
1 ) Visit http://tplinkmodem.net, and log in with the password you set for the
modem router.
2 ) Go to Advanced
and click the
3 ) Scroll down to configure the IPv6 parameters.
page. Select your ISP, and the
Advanced
> Network > Internet
(Edit) icon.
Set Up Internet Connections
VPI/VCI
ISP List, select
Test Internet Connectivity
> Network > Internet page.
page. Select your WAN Interface Name
or VLAN ID values
Other and then
17