Table of Contents
Advertisement
1
Figure 11
1. Wheel height adjustment lever
2. Release the wheel height adjustment lever and seat it
securely in the notch.
Note: Set all four wheels at the same height.
Using the Discharge Tunnel
Plug
1. Turn the engine off and wait for all moving parts to
stop.
2. Open the discharge door by moving the discharge door
handle rearward (Fig. 12).
2
1
Figure 12
1. Plug
3. Hold the discharge door fully open and insert the plug
(Fig. 13).
Note: Fit the lower section of the plug into the opening
first.
1021
m-2011
2. Discharge door handle
11
Figure 13
1. Door latch
4. Lift the door latch on the door handle (Fig. 13) and
push the top of the plug all the way in while moving
the door handle rearward.
5. Release the door latch, allowing it to hook over the
tabs on the plug (Fig. 14).
Figure 14
1. Tab (2)
6. To remove the plug:
A. Pull up on the door latch and hold the discharge
door fully open.
B. When the plug is unlocked, pull it out of the
discharge tunnel.
Note: To install and remove the plug more easily, hold the
door fully open so that it will not interfere with the lower
end of the plug.
Operating Tips
Review the safety instructions and read this manual
carefully before operating the lawn mower.
Clear the area of sticks, stones, wire, branches, and
other debris that the lawn mower could pick up or the
blade could hit and throw objects.
1
m-2012
1
m-2013
Advertisement
Table of Contents
