Connecting Your Tv - Onkyo DV-SP501 Instruction Manual

Connecting the DV-SP501—Continued

Connecting Your TV

• Connect the DVD Player to the TV directly. If you
connect the DVD Player to a VCR, TV/VCR combina-
tion, or video selector, the playback picture may be
distorted as DVD videos are copy protected.
Using S-Video
If your TV (or other equipment) has an S-Video input,
you can use this instead of the standard (composite) out-
put for a better quality picture.
• Use an S-Video cable (supplied) to connect the S-
VIDEO OUTPUT to an S-Video input on your TV (or
monitor or AV receiver).
Line up the small triangle above the jack with the same
mark on the plug before plugging in.
VIDEO
OUTPUT
S VIDEO
S VIDEO IN
Using Component Video (not European models)
You can use the component video output instead of the
standard video out jack to connect this player to your TV
(or other equipment).
This should give you the best quality picture from the
three types of video output available.
• Use a component video cable (not supplied) to con-
nect the COMPONENT VIDEO OUTPUT jacks to a
component video input on your TV, monitor or AV
receiver.
COMPONENT
COMPONENT
VIDEO IN
Y P P
B R
Note:
• To set up the player for use with a progressive scan TV,
see "Component Out (Ohter than European models)"
on page 45.
20
Y
AC INLET
VIDEO
OUTPUT
P VIDEO
B
P S VIDEO
R
COMPONENT
TV
Y
Y VIDEO
OUTPUT
P VIDEO
B
P P R S VIDEO
B
COMPONENT
P
R
TV
Using SCART (European models only)
If your TV has a SCART-type AV input, you can use a
SCART cable to connect this player to your TV. This
type of connection carries both the sound and the picture,
so there's no need to connect up the AUDIO OUTPUT
L/R and VIDEO OUTPUT jacks.
• Use a SCART cable (supplied) to connect the AV
CONNECTOR (RGB) - TV/AV Receiver to an AV
input on your TV.
AUDIO
OUTPUT
REMOTE
CONTROL
DIGITAL
OPTICAL COAXIAL
This connector can output composite video, S-Video, or
RGB video. The default setting is composite, which
should work with all TVs. Consult the manual that came
with your TV to see if you can use one of the higher qual-
ity settings. See page 46 for how to change the video out-
put.
AC INLET
MONO
AUDIO
OUTPUT
ANALOG
L AV CONNECTOR
DVD PLAYER
MODEL NO.
R
AV CONNECTOR
SCART
DV-SP 501
TV