Specifications
General Specifications
Width of Cut
Height of Cut
Blade Tip Speed
Cutting Blades
Unit Drive System
Castor Wheels
Note: Specifications and design subject to change without notice.
Optional Equipment
Leaf Mulcher
Leaf Mulcher Discharge Plate
Baffle Kit
Atomic Blade
Front Castor Wheel (Foam Filled)
71-5/8 in. (1.82 m)
Adjustable from 1 to 4 in. (25 to 102 mm) in 1/2 inch increments
16,270 ft./min. @ 3250 engine RPM
3 heat-treated steel blades, each 3/16 in. (4.8 mm) thick and 24-3/4 in. (55 cm) long
PTO driven gear box transmits power through a "AA" section belts to all blade
spindles.
Front: 8 in. (203 mm) diameter pneumatic wheels with greaseable roller bearings
(inflated to 35–50 psi [241–345 kPa])
Rear: 6 in. (152 mm) diameter hard rubber wheels with greaseable roller bearings
Model No. 30779
Part No. 57-0700
Part No. 99–5155
Part No. 104–1304
Part No. 93–5974
7