Selecting A Language; Selecting A Playback Audio Setting - Onkyo DV-S717 Instruction Manual

Selecting a Language

Good morning!
You can select a preferred language.

Selecting a Playback Audio Setting

You can select a preferred language and sound recording system from those included on the DVD video disc.
1
Press AUDIO during playback.
AUDIO
The current audio setting appears for
about 3 seconds.
Audio:
The abbreviation of the language appears
instead of the language name. Refer to the
list of languages and their abbreviations. 46
2
Press AUDIO or
AUDIO
setting appears on the TV screen.
Each time you press the AUDIO or
button, the audio settings included on the
DVD video disc change.
e.g.
ENTER
: Cycles backwards
To turn off the audio setting display
CLEAR
Press CLEAR.
Output sound conversion table (sampling frequency/quantization bit)
Sound recording system
Discs
Dolby Digital
48 kHz/16 bit
48 kHz/20 bit
Linear
DVD
48 kHz/24 bit
PCM
video discs
96 kHz/16 bit
96 kHz/20bit
96 kHz/24 bit
DTS
VIDEO CDs MPEG1
Audio CDs
Linear PCM 44.1 kHz/16 bit
Bon jour!
1 ENG PCM 2CH
Audio channel
Recording system
Language
Position number
while the audio
AUDI O: 1 ENG PCM 2CH
AUDI O: FRE 6CH
2
AUDI O: 3 SPA PCM 2CH
Bitstream
DIGITAL ANALOG
OUTPUT jack OUTPUT jack
48 kHz/16 bit
Bitstream
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/16 bit
–
Bitstream
44.1 kHz/16 bit 44.1 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit
¡Buenos días!
About recording systems
This DVD player uses the Dolby Digital, DTS, and PCM
recording systems and cannot play back DVD video discs
recorded in any other recording system.
Dolby Digital 5.1 Channel is displayed as " j 6CH."
Selecting sound channels of VIDEO CDs
A VIDEO CD may have left and right sound channels and
contain sounds or languages on each. You can switch
these two channels to hear a preferred sound or language.
During playback, press AUDIO repeatedly to select the
sound cannel.
AUDIO
Notes:
• Some discs allow you to change audio selections only via the disc
menu. If this is the case, press the MENU button and choose the
appropriate language from the selections on the disc menu.
• When you turn on the DVD player or replace a disc, player returns to
the initial default setting. 35
• When you select a sound track which is not Included on the disc,
the DVD player plays a prior sound track programmed on the disc.
Audio s. on the setting screen 32
Analog 2ch Stereo Output
DIGITAL ANALOG
OUTPUT jack
OUTPUT jack
Bitstream 48 kHz/16 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/20 bit
– 48 kHz/24 bit
– 96 kHz/16 bit
– 96 kHz/20 bit
– 96 kHz/24 bit
Bitstream –
44.1 kHz/16 bit 44.1 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit
2 3
1
4 5 6
7
8 9
+ 10 0
REMOTE CONTROLLER
L. R
Both the left and right
channel are heard.
L
The left channel is heard.
R
The right channel is heard.
38
PCM
DIGITAL ANALOG
OUTPUT jack
OUTPUT jack
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/16 bit
– –
44.1 kHz/16 bit 44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
1, 2
2
CLEAR
DVD
29