Connections; Connecting To A Tv - Onkyo DV-S717 Instruction Manual

Connecting to a TV

For details of Output sound, see
Connect the DVD player to your TV.
Connecting to a TV
Setting of the output sound type
From the on-screen displays, set the "Audio Out Select" to "Analog 2ch".
To S VIDEO OUT
Notes:
Refer to the instruction manual of the connected TV and how to activate TV input as well.
When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any

connections.

If your television set has one audio input, connect the DVD player to a Y cable adapter (not supplied) and then connect to your TV.
Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, TV/VCR combination or video selector, the playback
picture may be distorted as DVD discs are copy protected.
Connecting headphones
Connect headphones to the PHONES jack on the front panel using a
stereo plug.
Before connecting, temporarily turn down the volume with the PHONES
LEVEL volume. Readjust to your preference when playback begins.
12
29 .
ANALOG
OUTPUT
VIDEO OUT
L
R
Y C C S VIDEO VIDEO
B R
(yellow) (white)
To
VIDEO
OUT
Signal flow
If the TV has an S video input, connect the
DVD player with the supplied S video cable.
38
DIGITAL
REMOTE
OUTPUT
CONTROL
COAXIAL OPTICAL
To ANALOG AUDIO OUT
(red)
Audio·video cable (supplied)
To video input
S video cable (supplied)
To S video input
To wall outlet
Power plug
To audio inputs
TV or monitor with
audio video inputs
SYSTEM
STANDBY
POWER
PHONES PHONES LEVEL
DIMMER
TITLE MENU
MIN MAX
C
PHONES LEVEL
OPEN
MIN MAX