Safety And Instruction Decals; Specifications - Toro GREENS AERATOR 09120 Operator's Manual

Specifications

Engine: Briggs & Stratton, Vanguard, 4-cycle, air-cooled,
2-cylinder 11.9 kW (16 hp) @ 3600 rpm, 74.4 cm
cu. in) displacement. Electric start. Large capacity dual
element air cleaner. Full pressure lubrication 1.55 l (3.5
pint) oil capacity. Solid-state electronic ignition.
Electrical: 12-volt battery, 32-amp-hour. 16-amp alterna-
tor. Ignition switch and interlock switches on control han-
dle, transmission and coring head clutch.
Fuel Capacity: 17 l (4.5 gallons) unleaded gasoline.
Traction Drive: Double-banded V-belt from mechanical
clutch on engine to Peerless Model 2361 transaxle. Two
speeds forward and one reverse. Wheels driven individual-
ly by chains from transaxle.
Ground Speed:
1st Gear Forward: 1.8 km/h @ 3600 rpm (coring)
2nd Gear Forward: 5.3 mph @3600 rpm (transport)
Reverse: 3.1 km/h @ 1800 rpm.
Ground Clearance: 10.2 cm (4 inches).
Tires/Wheels: Two steering tires (front): 13 X 5.00-6, 2
ply, rib tread tubeless.
Two drive tires (rear): 18 X 9.50-8, 4 ply, Rib Terra
tubeless. Drop center demountable rims, greaseable
tapered roller bearings.
Recommended tire pressure for front and back tires is 69
kPa (10 psi).
Frame: Welded steel construction—tricycle.
Service Brake: Disc-type mounted to transaxle.
Controls: Traction clutch, coring head hydraulic lift and
key switch on control console. Throttle and choke on
engine. Transaxle shift lever on frame. Interlock switches
and service brake on steering handle.
Implement Drive: Triple banded V-belt from engine to
coring head.
Coring Unit Construction: Welded steel frame con-
struction with four crankshafts mounted in precision ball
bearings. Crankshafts drive four coring arms/tine heads.
3 (29.3
Drive: No. 50 O-ring sealed roller chain from counter-
shaft to coring crankshafts.
Lift: Single hydraulic cylinder powered by a vane type
pump. Control valve actuated by lift control lever.
Tine Heads: 4 individual heads each holding three tines.
Deflector chutes direct cores rearward away from drive
components.
Coring Width: 27 inches
Hole Pattern: 2.25 inches X 2.5 inches
Coring Depth: Up to 3.5 inches.
Tines: Case hardened tubing, hollow tapered design. 5/8"
tines standard. 12 tines required per unit.
Dimensions:
Length:
Width:
Height:
Wheelbase:
Weight:
Optional Accessories:
5/8" Tine
1/2" Tine
3/8" Tine
3/8" Slotted Tine
5/8" Long Wear Tine
5/16" Solid Spiker Tine
*3/4" Tine
*3/4" Slotted Tine
*Tine Block
3/8" Slotted Tine Kit
1/4" Spiker Tine Kit
Windrower
Coring Head Stand
Tire Scrapers
*3/4" tines requires 8 optional Tine blocks
193 cm (76 inches)
141 (55.5 inches)
99.1 cm (39 inches)
111.8 cm (44 inches)
461.8 kg (1236 pounds)
Part No. 59-3670
Part No. 94-3419
Part No. 59-3690
Part No. 94-3418
Part No. 59-9770
Part No. 77-5320
Part No. 62-4600
Part No. 92–7941
Part No. 62-4610
Part No. 94-6814
Model 09153
Model 09150
Model 09152
Model 09151
7