4
4.2
Sending a Fax After a Telephone Call
Here we will describe the method for transmitting a fax (manual transmission) after
talking on the telephone.
1
Press the [Fax/Scan] key.
2
Set an original in the paper feed
tray.
❍
Be sure to use the original feed
device.
3
Lift the telephone receiver.
❍
Check that there is a dial tone from the telephone receiver.
❍
When you lift the telephone receiver and hear a beep sound of the fax, hang
up the telephone receiver.
4
Designate the destination.
❍
Designation using the one-touch keys (See p. 6-2).
❍
Performing dial transmission (See p. 2-3).
❍
Designation using the fax program (See p. 6-5).
5
After talking, press the transmission key ([Start] key) for the destination.
A beep will sound when preparations are complete.
6
Press the [Start] key.
7
Hang up the telephone receiver.
❍
During fax transmission, hang up the telephone receiver.
If you lift the telephone receiver during fax transmission, it may reduce the
communication speed or cause communication errors
4-4
4.2 Sending a Fax After a Telephone Call
im2520f