Message Indicator - Panasonic KX-TGM420 Operating Instructions Manual

Accessibility

Message indicator

The message indicator on the handset and base unit can indicate
unit status, as explained below.
Indicator
Flashing rapidly
Flashing slowly
Setting the message indicator
You can enable and disable the message indicator for each type of
status.
– "Incoming call" (default: On)
– "New message" (default: On)
– "New VM" (default: On)
– "Missed call" (default: Off)
– "Alarm" (default: On) (handset only)
This feature can be set for each unit.
1
For handset: MMENUN#278
For base unit (using a handset): MMENUN#*278
2
MbN: Select the desired setting and press MSELECTN.
R " " is displayed next to enabled items.
R To disable an item, select it and press MSELECTN again. "
3
MSAVEN a MOFFN
Note:
R If the message indicator flashes when the handset is not placed on the base unit, the handset
consumes battery power faster than usual.
For assistance, please visit http://shop.panasonic.com/support
28
TGM420_450(en)_0426_ver031.pdf
Status
– Outside call or intercom call is being received or on hold. (page 32,
33, 35)
– The handset alarm is sounding. (page 49)
– There are new messages. (page 55)
– There are new voicemails. (page 61)
– There are missed calls. (page 52)
28
" disappears.
2016/04/26 10:55:38