Printek PrintMaster 700 Series User Manual page 52

Pagewid
Widthcon
CX-bid CX-bid=ON
CX-bid=OFF
Wrap Wrap=On
Wrap=Off
Sound Sound=On
Sound=Off
20 80 /10"
Off On
Parameter "Pagewid". This item's full
name is Pagewidth.
It is located beneath the already existing
menu item "Paphand" (Paper Handling).
This setting tells the printer logic the
width of the installed paper and is valid
for all paper ways.
By default this parameter is maximum
width.
80 Characters (80/10")
The value can be changed in 1/10" in a
range between 20 and 136 (80).
Parameter "Widthcon". This item's full
name is Width Control.
It is located beneath the already existing
menu item "Paphand" (Paper Handling).
This setting enables (on) / disables (off)
the possibility to define the position of
the carriage during loading
& ejecting paper.
If Off
the carriage's position is 4"
If On
Half of Value defined in
Pagewid
This function is OFF by default and is
valid for all paper ways.
CX-bid=ON sets the parallel interface of
the printer to bidirectional mode (IEEE
1284, Nibble mode), e.g. for Windows
Plug & Play.
CX-bid=OFF sets the interface to
compatibility mode in order to ensure
reliable operation with special external
boxes.
Wrap=On: If more characters than can
be printed are transmitted per line, the
characters which cannot be printed on
this line are printed at the beginning of
next line.
Wrap=Off: If more characters than can
be printed are transmitted per line, the
characters which cannot be printed on
this line are cut off.
When Sound=On, a beep is generated
every second to notify that paper is
empty.
43