Table of Contents
Advertisement
ETH-INT
CG-Tab
Graphic DLL Italic
CharSet
Extended Standard
E-USASCII
Country
E-UK
E-Italy
E-Norway
E-L.America
ISO8859-1
ISO8859-5
ISO8859-15
Abicomp
French
Swedish
Portuguese
Octets 1-4
IP-Addr
0 to 255
Gateway Octets 1-4
0 to 255
Subnet
Octets 1-4
0 to 255
IP Get M DHCP BOOTP
Static
Banner
Off On
EthSpeed Auto-Sense
10Mbit Half
10Mbit Full
100Mbit Half
100Mbit Full
E-France
E-German
E-Denmark I
E-Sweden
E-Spain I
E-Japan
E-Denmark II
E-Spain II
E-Korea
E-Legal
ISO8859-1 SAP ISO8859-2
ISO8859-7
ISO8859-9
ELOT-928
BRASCII
Roman8
US-ASCII
German
Italian
Norwegian
Spanish
Greek DEC
Cro-ASCII
Input of the IP address of the printer
This menu level offers the possibility to
set the IP address, which is divided into
four digit groups (octet 1 to 4).
Input of the Gateway address of the
printer.
Input of the Subnet mask address of the
printer.
Selects the way of administrating the IP
address.
Specifies whether a banner page is to be
printed out, when using the LPD/LPR
protocol.
The transmission speed is detected
automatically.
Sets the transmission speed to 10 MBit
half duplex per second.
Sets the transmission speed to 10 MBit
full duplex per second.
Sets the transmission speed to 100 MBit
half duplex per second.
Sets the transmission speed to 100 MBit
full duplex per second.
Only available for Epson
LQ-2550/LQ-2170 emulation. Either the
Epson character set Italics or the IBM
graphics character set or a DLL
(download) character set, as defined
before, can be activated in the code
range from hex. A0 to hex. FE.
Selects the IBM standard characters or
the extended IBM characters.
Selects the national character set. These
character sets can be used according to
the selected emulation.
38
Advertisement
Table of Contents
