Legacy AERIS Owner's Manual page 41

d. You will now see the Volume Control Page- please bookmark this page for future use. The bookmark button on Apple devices is the
square and arrow at the bottom of the screen that looks like this:
Firefox users can click the Star to bookmark their remote control.
TIP You can always return to your remote by visiting and entering your serial number
You do NOT need to re-enter your Internet information, only the serial number
e. Confirm your device is talking to Wavelet by adjusting the volume slider from your device and watch the Wavelet volume change
remotely. Congratulations! You can also control your Wavelet from additional devices by repeating Step 2 for each device you wish
to use.
Volume Adjustments Before Running Room Correction on Your Wavelet
1. To prepare for running room correction, please set the Wavelet volume to 85. The "Fine" slider is useful for making precise
adjustments. Touch the "Fine" slider and move it to the far right- notice when you release, the volume increases by 3dB, and
when moved slightly to right, increases by .1 dB increments. You can use the Coarse adjustment is useful for making large
adjustments. The "Balance" slider can be used to adjust the center image of your speakers. At the extreme left or right, the slider
provides a 2dB boost. Please note that the balance should be set to 0 for running room correction.
-Volume
http://bohmeraudio.com/setup.html
40