Selecting Mp3 Folders & Tracks By; Number - Onkyo DX DX-7555 Instruction Manual

Playing CDs—Continued
I To Select MP3 Tracks in Navigation Mode
With Navigation mode you can select MP3 tracks by
navigating through the folder hierarchy. This mode can
only be used while playback is stopped.
1 While playback is stopped, press
and hold [
The DX-7555 enters Navigation mode
and " [ ROOT ] " appears on the dis-
play.
When JOG MODE is set to NAVI in
the SETUP menu, pressing the [
] dial will put the DX-7555 into
Navigation mode (see page 21).
You can also change to Navigation
mode by pressing [ / / / ] buttons
or the ENTER button on the remote
controller.
2
Press the [
more, or press the [ ] button on
the remote controller.
The name of the first folder one level
down from root appears on the display.
Remote
controller
If the disc has no folders, the name of
the first track is displayed.
• You can select a folder or track
existing in a same hierarchy by
rotating the [
ing the [ / ] buttons on the remote
controller.
• Pressing the [
[ / ] buttons on the remote control-
ler, while selecting a folder, you can
go down by one hierarchy; and go
one hierarchy up by pressing the [ ]
button on the DX-7555, or the [ ]
button on the remote controller.
3
If you press the [
the ENTER button on the remote
controller, while a track is
selected, playback will start for
the track.
You can perform the same operation
Remote
controller
by using the Play [
Tip:
If you press the Play [
a folder is selected, playback start with
the first track in that folder.
/ ] dial.
/
/ ] dial once
/ ] dial, or press-
/ ] dial, or the
/ ] dial, or
] button.
] button while
Selecting MP3 Folders & Tracks by

Number

This section explains how to select MP3 folders and
tracks by number.
1 While playback is stopped, press
the [SEARCH] button.
Remote
controller
"–" appears below the GROUP indica-
tor on the display.
You can also perform the same opera-
tion by pressing the [>10] button
repeatedly.
If the disc contains ten or more folders,
"– –" appears.
2
Use the number buttons to enter
the folder number.
Remote
controller
Enter the numbers in order from left-to-
right. For example, to enter folder num-
ber 25, press [2] and then [5].
The name of the specified folder
appears on the display.
3
Press the ENTER button when
the target playback group (folder)
Remote
is displayed.
controller
4
Use the number buttons to enter
the track number.
Remote
controller
Playback starts automatically.
If the folder contains 100 or more
tracks, follow the steps described here
to select tracks. For example, to enter
track number 32, press [>10], [10/0],
[3], and then [2]. To enter track num-
ber 132, press [>10], [1], [3], and then
[2].
15