Connecting The Dx-7555; Audio Connections - Onkyo DX DX-7555 Instruction Manual

Connecting the DX-7555

Audio Connections

• Read the manuals supplied with your other audio
equipment.
• Don't connect the power cord until you've completed
all audio connections.
ANALOG AUDIO OUTPUT
If your hi-fi amp or AV receiver doesn't have a digital
input, use the supplied RCA/phono audio connecting
cable to connect the DX-7555's ANALOG AUDIO
OUTPUTs to your amp's analog CD inputs.
Notes:
• RCA/phono audio cables are usually color coded: red
and white. Use red plugs to connect right-channel
inputs and outputs, and use white plugs to connect
left-channel inputs and outputs.
• Push each plug in all the way to
make a good connection (loose
connections can cause noise or
malfunctions).
RCA/phono
audio cable
Optical fiber cable
(not supplied)
L R
CD
Hi-fi amp, AV receiver
10
Right!
Wrong!
Connect one or the
other
Coaxial cable
(not supplied)
Optical IN Coaxial IN
• To prevent interference, keep audio cables away from
power cords and speaker cables.
DIGITAL AUDIO OUTPUT
If your CD-R, MiniDisc, or DAT recorder has a digital
input, use a commercially available coaxial or optical
fiber digital audio cable to connect the DX-7555's
COAXIAL or OPTICAL DIGITAL AUDIO OUTPUT
to your recorder.
You can also use the digital outputs to connect to an amp
that has a digital input.
Note:
The OPTICAL DIGITAL AUDIO
OUTPUT has a dust cap for keeping
out dust and dirt when it's not in
use. Remove the cap before con-
necting an optical fiber cable. Push
the plug in all the way to make a
good connection. Keep the dust cap
in a safe place for future use.
Connect
one or the
other
Coaxial cable
(not supplied)
Coaxial IN
CD-R, MiniDisc, DAT recorder
Disconnect the power
cord before making any
connections!
Optical fiber cable
(not supplied)
Optical IN