Specifications - Onkyo DR-L50 Instruction Manual

Specifications

AMPLIFIER SECTION
Power Output (FTC) All channels 25 watts per channel min.
RMS. into 6 ohms two channel driven,
1,000 Hz with no more than 10% total
harmonic distortion.
Continuous power output (DIN)
All channels 21 watts per channel min.
RMS. into 6 ohms two channel driven,
1,000 Hz
Continuous Power output (EIAJ)
All channel 26 watts per channel min.
RMS. into 6 ohms two channel driven,
1,000 Hz
Total Harmonic Distortion 10 % at rated power
0.2 % at 1 watt output
IM Distortion 10 % at rated power
0.2 % at 1 watt output
DVD SECTION
Signal readout system Optical non-contact
Linear velocity 3.49 m/s (Single Layer)
3.84 m/s (Dual Layer)
Error correction system Reed Solomon Product Code
Signal system PAL/Auto Mode
Regional restriction code European area: 2
South-east Asian area: 3
Australian and South American area: 4
PRC: 6
Output Level and Impedance
Composite 1.0Vp-p, 75 ohms
S-Video Y: 1.0 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Component Y: 1.0 Vp-p, 75 ohms
(Except European models) Pb, Pr: 0.7 Vp-p, 75 ohms
RGB (European models) 0.7 Vp-p, 75 ohms
TUNER SECTION
Tuning Range
Usable Sensitivity
50 dB Quieting Sensitivity
Capture Ratio
Image Rejection Ratio
IF Rejection Ratio
Signal-to-noise Ratio
Alternate Channel Att. (+/– 400 kHz) FM: Mono
Selectivity
AM Suppression Ratio
GENERAL
Power Supply
Power Consumption
Power Consumption (standby mode) : 2.0 W
Power Supply
Power Consumption
Power Consumption (standby mode) : 2.6 W
Specifications and features are subject to change without notice.
FM: 87.50 to 108.00 MHz (50 kHz steps)
AM: (South American models)
530 to 1710 kHz (10 kHz steps)
FM: Mono 11.2 dBf, 1.0 µV (75 ohms IHF)
0.9 µV (75 ohms DIN)
Stereo 17.2 dBf, 2.0 µV (75 ohms IHF)
23 µV (75 ohms DIN)
AM: 30 µV
FM: Mono 17.2 dBf, 2.0 µV (75 ohms)
Stereo 37.2 dBf, 20.0 µV (75 ohms)
FM: 2.0 dB
FM: 40 dB (South American models)
AM: 40 dB
FM: 90 dB
AM: 40 dB
FM: Mono 73 dB, IHF
Stereo 67 dB, IHF
AM: 40 dB
55 dB, IHF
FM: 50 dB, DIN 55dB, IHF
FM: 50 dB
AC 120 volts, 60 Hz
: 130 W
29 W ( * )
AC 230-240 volts, 50 Hz
: 120 W
29 W ( * )
Damping Factor 40 at 8 ohms
Input Sensitivity and Impedance
DIGITAL OPTICAL IN
LINE (TV/LINE, MD/CDR/TAPE)
Output Level and Impedance
DIGITAL OPTICAL OUT
REC OUT (MD/CDR/TAPE)
PRE OUT (SUBWOOFER)
Frequency Response 20 to 30,000 Hz : +/– 0.8 dB
Acoustic Control 1: +9 dB at 82 Hz
2: +9 dB at 82 Hz
+6 dB at 10,000 Hz
Signal-to-noise Ratio 100 dB (0.5 V INPUT LINE)
Muting –50 dB
Laser Semiconductor laser, wavelength 650 nm
Frequency response 10 Hz to 44 kHz (96 kHz)
Signal-to-noise ratio (digital audio)
Audio dynamic range (digital audio)
Harmonic distortion (digital audio)
Wow and flutter Below threshold of measurability
Operating conditions Temperature: 5°C to 35°C (41°F to 95°F),
Operation status: Horizontal
(Other models)
522 to 1611 kHz (9 kHz steps)
85 dB (Other models)
Harmonic Distortion FM: Mono
AM:
Frequency response FM: 30 to 15,000 Hz (+/– 1.0 dB)
Stereo Separation FM: 45 dB at 1,000 Hz
Stereo Threshold FM: 17.2 dBf,
Output FM: 750 mV
AM: 150 mV
Power Supply
Power Consumption
Power Consumption (standby mode) : 2.6 W
435 × 81 × 366 mm (17
Dimensions (W x H x D)
Weight 7.0 kg (15.4 lb.)
(* ) When clock display is on.
–21 to –15 dBm
200 mV/50 kohms
–21 to –15 dBm
200 mV, 2.2 kohms
1 V, 470 ohms
More than 100 dB
More than 93 dB
Less than 0.025%
0.2 %
Stereo 0.3 %
0.7 %
30 dB at 100 to 10,000 Hz
20 µV (75 ohms)
AC 220-230 volts, 50/60 Hz
: 120 W
29 W ( * )
× 3 × 14
1 / 3 / 7 / ins.)
8 16 16
87