Onkyo DR-L50 Instruction Manual page 77

I Selecting subtitles, assist subtitles or no
subtitles Expert
Use this function to turn the subtitles on or off. Additionally,
some DVDs provide assist subtitles that provide additional
explanations of scenes in addition to the standard subtitles for
viewers who are hard of hearing. Select [Assist Subtitle] to
display these subtitles on DVDs where this function is offered.
Make changes to the [Subtitle Display] setting in the Setup
screen Language menu in the [Expert] menu mode (page 69).
You cannot make this setting with a disc playing.
Video1 V2 Language General
OSD Language — English
Audio Language English
—
Subtitle Language — English
Auto Language — On
DVD Language On
Subtitle Display Off
Subtitle Off Assist Subtitle
Move Exit
SETUP
Settings: On (Factory setting)
Off
Assist Subtitle
Notes
• If there is no subtitle information recorded on the DVD, no
subtitles are displayed even if this function is set to [On].
• This setting serves as a default as whether or not to display
subtitles. Even if this option is set to [Off], subtitles can be
displayed by pressing SUBTITLE. Similarly, if this option is set to
[On], the subtitles can be turned off by pressing SUBTITLE and
then CLEAR.
I Forcing subtitles to be displayed
Even when the subtitles are turned off, some DVDs will
nevertheless display them on the screen. This setting allows
you to select the language of the subtitles to be displayed with
this type of DVD.
Select [With Audio] to display the subtitles in the same
language as the currently selected [Audio Language]. Select
[Selected Subtitle] to display the subtitles in the language set
in the [Subtitle Language] setting.
Make changes to the [Subtitle Off] setting in the Setup screen
Language menu in the [Expert] menu mode (page 69).
You cannot make this setting with a disc playing.
General
Video1 V2 Language
OSD Language — English
Audio Language — English
Subtitle Language — English
Auto Language On
—
DVD Language — English
Subtitle Display With Audio
Subtitle Off — Selected Subtitle
Move SETUP Exit
Settings: With Audio
Selected Subtitle (Factory setting)
I When [Other] is selected
When you want to select one of the 136 languages as the
main audio language, follow the steps below when the
following screen appears.
A language code list can be found on page 78.
Video1 V2
OSD Language
Audio Language
Subtitle Language
Auto Language
Setup audio language
Move
1 Use the cursor buttons to select [Other] and press ENTER.
The language selection screen appears.
Audio Video1
Audio Language
List of Language
ja: Japanese
Setup audio language
–/+
Move
2 Use the cursor buttons (2/3) to select either "List of
Language" or "Code".
3 If you select "List of Language", use the cursor buttons
(5/∞) to select the language.
For languages which are only shown as a code, refer to
"Language Code List" on page 78.
List of Languages
Expert
ja: Japanese
If you select "Code", use the cursor buttons (5/∞) to input
the numbers of the input code.
Use the cursor buttons (2/3) to change the position of the
cursor. You can also use the number buttons to enter the code.
Code (0~2)
1
4 Press ENTER to set the new language.
To exit the screen without making any changes, press RETURN.
General
Language
English
French
German
Italian
Spanish
Other
Exit
ENTER Select SETUP
V2 Language General
Code (0~2)
1 0 0 1
Return
RETURN
Select Exit
SETUP ENTER
0 0 1
77