Programming Combo Device Control - One for All URC10820N User Manual

6. Repeat steps 1 through 5 for each device you want to control.
For future reference, write down each working device code in
the following boxes:
TV Code:
VCR Code:
CD Code:
AUD Code:
CBL Code:
SAT Code:
DVD Code:
PVR Code:
AUX1 Code:
AUX2 Code:

Programming Combo Device Control

You can set this remote to control your combo devices such as TV/
VCR, TV/DVD, Satellite/PVR/DVR, Home-Theater-In-A-Box, and many
others with a single code. For a complete list of combo devices,
refer to the "Device Table."
NOTE: Some combo device types have codes that you can program
on separate device keys. For example, you can program DVD
Player/ VCR Combo codes under the VCR or DVD mode keys. See
"Setup Codes for DVD/VCR Combos (Códigos de Configuración para
Aparatos Combinados DVD/ Videograbadora)"; note that there are
two sections under this device type.
To control a TV/DVD Combo:
1. Turn on the TV/DVD Combo and insert a DVD.
NOTE: Please read steps 2 through 4 completely before
proceeding. Highlight or write down the codes and device you
wish to program before starting step 2.
2. On the remote control, press TV.
Press and hold SET until the LED (red light) blinks twice, and
3.
then release SET.
4. Use the setup codes under the TV/DVD Combos heading (use
codes listed as "Controlled by TV key"). Locate the brand name
and then enter the first four-digit code for your device. If
performed correctly, the LED will blink twice.
6
Brand Name:____________________
Brand Name:____________________
Brand Name:____________________
Brand Name:____________________
Brand Name:____________________
Brand Name:____________________
Brand Name:____________________
Brand Name:____________________
Brand Name:____________________
Aux.1 Device Type:_______________
Brand Name:____________________
Aux.2 Device Type:_______________