Table of Contents
Advertisement
Fig. 24
Channel Select one channel for setting
Motion Select activate mode including: motion detection, video shelter and video lost.
Sensitivity Select sensitivity of motion detection or video shelter. Option including: Highest, High,
Medium, Low, Lowest.
Area Setup Alarm area should also be set to activate motion detection or video shelter though such function
was selected.
In area setup interface, full screen is the default alarm area. Use direction key to move cursor, press
to
cancel chose area, and press
to recover chose area.
Relating When alarm activated, relevant channel can be selected to record if recording period has been
setup in "Schedule" menu.
Alarm Out
Activate alarm out or not.
Schedule
Enter "Schedule" interface to setup alarm period in which system will activate relevant disposal
mode such as buzzer alarm, alarm output, relevant channel recording if alarm has broken out. Alarm schedule
Schedule Recording
setting is the same as schedule recording setting, please refer
section.
In the course of setting up the parameters, if the parameters needed to be set the same in all channels, you can
34
Advertisement
Table of Contents
