Table of Contents
Advertisement
Move cursor with
and
Channel Number: choose a channel to setup.
Resolution: The higher resolution the clearer image will be. The resolution options from low to high are:
QCIF CIF. Default resolution: CIF
Max Bit Rate: If you select VBR, when the video input has great movement, we need to limit the max bit
rate. The max bit rate selection has relations with resolution. If you select high resolution, you must select
high bit rate. If you select CBR, you can select bit rate size. Default bit rate: 512K
Coding Type: There are two options: CBR or VBR. Default coding type: VBR
If you select VBR, DVR will adjust the actual bit rate according to the video movement. When there is
not much movement, DVR will use low bit rate, while there is much movement, DVR will use high bit rate.
In this case, DVR can save HDD usage and network bandwidth.
If you select CBR, DVR will use the fixed bit rate to compress image.
Frame Rate: Frame per second. Options are: 25 PAL:25, NTSC:30
Quality: Define the image quality. There are 5 options: Basic, Medium Good, High, and Best. High image
quality needs high bit rate size. Default quality: High
In the course of setting up the parameters, if the parameters needed to be set the same in all channels, you can
select 'ALL' after finishing the setup of parameters of one channel. The system will prompt a dialog box. When
pressing 'OK', parameters setup for all channels will be achieved.
Manual Recording
Press " " button on the panel to enter into "Manual Record" interface directly.
Fig. 19
on the front panel and select item with
20
29
and
.
13 6 3 1. Default frame rate: "25"
Advertisement
Table of Contents
