One for All Mosaic URC-9990 User Manual page 8

SETUP BY SEARCH
As an alternative method, you can use MOSAIC's search program to find the correct manufacturer's
codes to set up your entertainment devices. With this method you first select a device you want to
add, then you perform a code test, advancing through one or more types, to find the one that works.
Example: to use the search method for your television:
Esc
Tap on
Esc
To check
previous code,
tap on
PREV
TV
First, tap on
Tap on the OK key to confirm your choice. MOSAIC will ask if you want to relabel the newly-added
device.
• To relabel it, tap on the YES key and you will see the LABEL Menu (see explanation on page 25
step 6).
• To keep the label the same, tap on the NO key.
You will see a confirmation screen that says the key has been successfully programmed. To
program another device, tap on the ESC key. To return to the Device Screen, press on ESC or
MUTE for at least 2 seconds.
To test remote control of the newly-added device, tap on its key on the Device Selection Strip. Try
using the Hard Keys to adjust volume and change channels. Try tapping on the Page Arrows to access
other remote control functions and then try tapping on the soft keys on each page to test them.
www.oneforall.com
DEVICE SETUP
?
Welcome to Device Setup!
What method
would you like to use?
BY BRAND
BY SEARCH
BY CODE
DELETE
SEARCH
OK
Use the test keys to find
your device type.
Press OK to save.
NEXT
Test
PWR
1
Esc
Tap on
VCR
TUN
TAPE
V.ACC
Esc
ADD the device or REPLACE
If device does not
respond, tap and
repeat test.
SEARCH
Select the device.
TV CBL SAT
DVD LD
AMP CD
DAT PHO
HOME
SEARCH
?
Would you like to
it with an existing one?
ADD
REPLACE
Tap on
if 2 TV
nd
Tap on
if 1 TV
st
7