One for All Mosaic URC-9990 User Manual page 7

BRAND SET
Esc OK
Your brand has multiple
types; use the scroll bars
to try each one in turn.
Nokia
Test
VCR 1
PWR
VCR 2
VCR 3
1
VCR 4
VCR 5
VCR 6
BRAND SET
Relabel the device?
CBL VCR VCR
YES NO
• To relabel the device key, tap on the YES key and you will see the LABEL Menu (see explanation
on page 25 step 6).
• To keep the label the same, tap on the NO key.
You will see a confirmation screen that says the key has been successfully programmed. To
program another device, tap on the ESC key. To return to the Device Screen, press on ESC or
MUTE for at least 2 seconds.
To test remote control of the newly-added device, tap on its key on the Device Selection Strip. Try
using the Hard Keys to adjust volume and change channels. Try tapping on the Page Arrows to access
other remote control functions and then try tapping on the soft keys on each page to test them.
NOTE: Remember to press the correct device key before operating your device. Only one device
(CD, amplifier, cassette, etc.) can be assigned to a device key. If your original remote operates
more than one device (for example, a receiver, CD player and cassette player in one remote),
you need to set up each device separately.
6
BRAND SET
Esc
Would you like to
ADD the device or REPLACE
it with an existing one?
Tap on
if 2 VCR
nd
REPLACE
Tap on
if 1 VCR
st
?
ADD
Tap on
BRAND SET
Esc OK
Press OK to confirm.
CBL VCR VCR
www.oneforall.com