Table of Contents
Advertisement
Setting the Channels and Clock
Preparation:
Turn on the mains for the television
(and connected equipment) and
select the appropriate AV input to
suit the connections to this unit.
These are the first settings you make
upon buying the unit. You don't need
to make these settings again.
DVD
¦
When connecting to a Q Link
compatible TV with a fully wired 21-pin
Scart cable or a VIERA Link (HDAVI
Control 3) compatible TV with an
HDMI cable (
– You can download the tuning positions from the television
for the channels in this unit's channel coverage.
– This unit's Auto Clock Setting function synchronizes the time
when the TV channel that is broadcasting time and date
information is tuned.
Power Save Function:
, to select "On" or
"Off", then
– Set to "On" to reduce power
consumption in standby mode.
– Refer to the following chart for the Power Save function
features when the unit is turned off.
Power Save
Power consumption
Watching the picture from
the digital satellite receiver
connected to the AV2 terminal
Startup time
Front display
When setup has completed, the confi rmation screen appears.
OK
The Owner ID settings screen appears.
, then press the numbered buttons to
enter your choice of a 4-digit PIN number.
Make a note of the PIN number
(don't forget), as it is not possible
to return to the factory preset.
OK
Downloaded From DvDPlayer-Manual.com Panasonic Manuals
TV's remote control
to turn the unit on.
42), downloading from the television starts.
OK
On
Approx. 2 W
Cannot do
Not quick
Turns off
(The clock display
disappeared.)
to store the PIN number.
(continued on the next page)
Download from TV
Pos
4
Download in progress. Please wait.
RETURN: to cancel
RETURN
Power Save
On
Off
On: Minimise standby power
consumption, without
Quick Start function and
AV2 loop-through in standby.
SELECT
Off: With Quick Start
function and AV2 loop-through
OK
RETURN
in standby.
Off
Approx. 8 W
Can do
Quick
Stays lighted
Owner ID
PIN number
Name
House No.
Postcode
RETURN
RETURN : leave
DVD
TV
CH
DRIVE
SELECT
AV
A A
3
1
2
4
5
6
7
8
9
DELETE
0
INPUT
SELECT
SKIP
SLOW/SEARCH
STOP
PAUSE
PLAY/x1.3
TIME SLIP
OK
10
OPTION
11
CREATE
AUDIO DISPLAY
CHAPTER
Tips
Auto-Setup
Auto-Setup starts instead of "Download
from TV" in the following cases:
– when connecting to a television with
the VIDEO OUT, S VIDEO OUT or
COMPONENT VIDEO OUT terminal
(
75)
– when connecting to a television that
does not have the VIERA Link or Q Link
functions
This function automatically tunes all
available TV stations and synchronizes
the time when the TV channel that is
broadcasting time and date information is
tuned. This takes about 8 minutes.
To cancel setup
Press [RETURN].
If the unit displays "No stations
found !"
Press [] to select "No", then press [OK].
Go to step . After you have performed
steps –, turn off the unit and confi rm
the cable or aerial input is connected
to the RF IN terminal. Restart the setup
again (
67).
If the clock setting menu appears or
the clock is not correct, set the clock
manually (
14).
Restarting the setup (
67)
To correct the PIN number
1. Press [, ] to select the digit.
2. Press the numbered buttons to enter
the digit.
When this unit is not operated for
approximately 5 minutes while the screen
is being displayed, the screen saver may
be displayed.
You can turn this function off (
"Screen Saver").
VOL
CH
VIDEO Plus+
STATUS
EXIT
RETURN
MANUAL SKIP
13
70,
Advertisement
Table of Contents
