Table of Contents
Advertisement
When the format confi rmation screen is
displayed
Formatting is the process of making media such as
Formatting is the process of making media such as
DVD-RAM recordable on recording equipment.
Important:
Formatting permanently deletes all disc contents
(including the contents that have been recorded on a
PC), regardless of protection status of disc.
[RAM] [-RW‹V›] [+R] [+R[DL] [+RW]
The following screen may
appear when inserting a new
disc or a disc that has been
recorded on another
equipment.
Only format the disc if you
intend to use it for recording.
Do not format if you intend to view pre-recorded titles
or contents from the disc.
to select "Yes", then
Tips
Refer to "Formatting Discs" (
When removing a Recorded or Copied Disc
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
After recording or copying, if
you press [ OPEN/CLOSE]
to eject the disc, the following
screen may appear.
Finalising
DVD-R, etc. recorded or copied on this unit cannot be
played on other players immediately after recording or
copying. Using the Finalise feature allows you to play
these discs on other players.
Once the disc is fi nalised you will no longer be able to
record onto the disc.
[However if you format the DVD-RW, you can record and
copy onto the disc again. (
REC
to start fi nalising.
or
OPEN/CLOSE
Notes
You cannot stop fi nalising once you have started it.
Tips
If you want to provide the disc with a name or set play menu
select, select "Disc Name" (
Downloaded From DvDPlayer-Manual.com Panasonic Manuals
"Top Menu" (
Refer to "Finalising" (
SELECT
OK
OK
64) for more detail of formatting.
Finalise
Finalise the disc so that it can be played
on other DVD players.
Note : Recording or Editing is not possible
after finalising. This may take up to
Press the REC button to start finalise.
Press the OPEN/CLOSE button to exit.
This disc cannot be played on other
DVD players without finalising.
64)]
to eject the disc without
fi nalising.
64), "Auto-Play Select" (
65) in "DVD Management" before fi nalising.
65) for more detail of fi nalising.
Specifying the Recording Time
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
This function allows specifying the length of recording
time up to 4 hours.
During recording
On the main unit
REC
repeatedly until the desired
time is reached.
− The recording time and the unit's display changes
as follows:
Counter (Cancel) OFF 0:30 OFF 1:00
OFF 4:00
OFF 3:00 OFF 2:00
RETURN
Notes
This function does not work during timer recording or Flexible
Recording.
Recording stops and the set time is cleared if you press
[ STOP].
The unit turns off automatically after recording fi nished.
Direct TV Recording
[HDD]
This function allows you to immediately start recording
the programme that you are viewing on the TV without
having to change the channels on this unit.
You can use the function when you connect the unit to a
Q Link compatible TV using a 21-pin Scart cable.
min.
You can also use the function when you connect the unit
to a VIERA Link (HDAVI Control 3) compatible TV with
an HDMI cable and a 21-pin Scart cable.
DIRECT TV REC
Press and hold for about
1 second.
– The titles are recorded to the HDD.
Tips
To stop recording
Press [ STOP].
Notes
When the unit is connected to a Panasonic TV, if you switch TV
channels while using Direct TV recording, the Direct TV recording
stops.
When "EXT-L" lights on the unit's display (
recording is unavailable.
65) or
OFF 1:30
29), Direct TV
27
Advertisement
Table of Contents
