Procedure
16
17
1
Removing Parts from the Crate
No Parts Required
Procedure
Remove the tires, the seat and the Rollover Protection
System (ROPS) Kit from the shipping crate.
2
Checking the Tire Pressure
No Parts Required
Procedure
Pressure: 13 psi (90 kPa)
Note: The front caster wheels may be semi-pneumatic
tires. Semi-pneumatic tires do not have a valve stem and
do not need to be checked.
Check the air pressure in the front tires and the rear tires.
Description
No parts required
Operator's Manual
Engine Owner's Manual
Registration Card
Operator training material
Key
Figure 1
Qty.
Check the machine before delivery to
–
the customer.
1
1
1
Delivering the machine to the customer.
1
2
3
Raising the Machine Up and
Installing the Rear Wheels
Parts needed for this procedure:
2
Rear wheels
Procedure
1. Remove the screws holding the right angle retaining
plate to the crate.
2. Raise the back of the machine up and support it with
jack-stands.
DANGER
Mechanical or hydraulic jacks may fail to
support the machine and cause a serious injury.
• Use a jack stand(s) when supporting the
machine.
• Do not use hydraulic jacks.
2
Use
Figure 2