Advanced Features; Colour And Brightness; Volume Punch-Through; Auto Scan - One for All URC-7532 Manual

One for all 3 remote

Hide thumbs

Table Of Contents

Table of Contents

Colour and Brightness

Depending on the functions of your original remote control, the ONE FOR

ALL may operate the colour and brightness settings of your television.

Colour (+)

Colour (-)

Brightness (+) = Press and release MAGIC then hold Channel (+)

Brightness (-) = Press and release MAGIC then hold Channel (-)

Note: You have 5 seconds to press the Volume or Channel keys for colour or

brightness adjustment after pressing MAGIC.

Volume Punch-Through

You may be able to use some features of your Television and Video

Recorder at the same time. If you're watching a programme on your Video,

you can adjust the volume (a TV function) without first pressing the TV key.

The chart below lists some of the possibilities:

Last Key Pressed:

VCR

AUX

To punch through to TV Volume while in VCR mode press

MAGIC* 9 9 3

To cancel the "Volume Punch Trough"

Press MAGIC* 9 9 3

* Here you must hold down MAGIC until the red light key blinks

twice.

Auto Scan

Your ONE FOR ALL 3 comes with a special Auto Scan function which lets

you "scan" through every programme available on your device.

For example, to scan the programmes on your TV:

Aim the ONE FOR ALL 3 at your TV. Press the TV key. Press and

release MAGIC then press the MUTE key.

The ONE FOR ALL 3 will send the command to advance through all

the programmes available on your Television stopping at each

programme for about three seconds. Remember, you must aim the

ONE FOR ALL at your device the entire time you are using Auto

scan.

When you find a programme you would like to watch, simply press

any key on the ONE FOR ALL key pad to stop the Auto Scan

feature.

Important notes: Auto Scan may not work with devices that did not have

programme +/- keys on the original remote control.

WWW.ONEFORALL.COM