Procedure
14
1
Removing Parts from the Crate
No Parts Required
Procedure
Remove the tires, the seat and the parts for the ROPS
from the shipping crate.
2
Checking the Tire Pressure
No Parts Required
Procedure
Pressure: 13 psi (90 kPa)
Check the air pressure in the tires.
Description
Operator's Manual
Engine Owner's Manual
Registration Card
Operator training material
Key
Figure 1
Qty.
1
1
1
Delivering the machine to the customer.
1
2
3
Raising the Machine Up and
Installing the Drive Wheels
Parts needed for this procedure:
2
Rear wheels
Procedure
1. Remove the screws holding the right angle retaining
plate to the crate.
2. Raise the back of the machine up and support it with
jack-stands.
2
Use
Figure 2
Figure 3