Figure 19
4. Install the air cleaner cap onto the air cleaner and
secure it with the hose clamp.
Figure 20
10
Checking the Machine for
Grease
Parts needed for this procedure:
Number 2 general purpose lithium base or
1 tube
molybdenum base grease. (Purchase separately.)
Procedure
1. Check the tensioning arm for grease.
2. Check the grease for the three spindle bearings. If
needed, add grease until it comes out of the lower
seals.
11
Checking the Engine Oil Level
No Parts Required
Procedure
Before you start the engine and use the machine, check
the oil level in the engine crankcase; refer to Checking
Oil Level in Operator's Manual.
8
Figure 21