Sound Pressure; Sound Power; Vibration; Safety And Instruction Decals - Toro 20833 Operator's Manual

Replace worn or damaged parts.
Use extra care when handling gasoline; gasoline vapors
are explosive.
Never tamper with safety devices. Check their proper
operation regularly.
Keep the lawn mower free of grass, leaves, or other
debris buildup. Clean up any oil or fuel that spills.
Stop and inspect the lawn mower if you strike an object.
Repair the lawn mower, if necessary, before starting the
engine.
Never attempt to make wheel height adjustments while
the engine is running.
Grass catcher components are subject to wear, damage,
and deterioration, which could expose moving parts or
allow objects to be thrown. Frequently check the
components and replace them with the manufacturer's
recommended parts when necessary.
Lawn mower blades are sharp and can cut. Wrap the
blade(s) or wear gloves, and use extra caution when
servicing them.
Do not change the speed settings on the engine.
If you must drain the fuel from the fuel tank, do it
outdoors.

Safety and Instruction Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or lost.
93-4105
1. Warning—read the Operator's Manual.
2. Thrown object hazard—keep bystanders a safe distance from
the machine.
3. Thrown object hazard, mower—keep the deflector in place.
4. Cutting/dismemberment hazard of hand or foot, mower
blade—stay away from moving parts.
5. Warning—stop the engine before leaving the machine.
To ensure the best performance and safety, purchase
only genuine Toro replacement parts and accessories.
Maintain or replace safety and instruction decals when
necessary.

Sound Pressure

This unit has a maximum sound pressure level at the
operator's ear of 84 dBA, based on measurements of
identical machines per Directive 98/37/EC.

Sound Power

This unit has a guaranteed sound power level of 96 dBA,
based on measurements of identical machines per Directive
2000/14/EC.

Vibration

This unit does not exceed a hand/arm vibration level of
2
7.4 m/s , based on measurements of identical machines per
Directive 98/37/EC.
100-4355
1. Cutting height settings
5