(Individual Volume Unlock); Unlocking All Volume Control; (Restoring Default Setting ) - One for All URC-3300 User Manual

CHANGING VOLUME LOCK (cont'd)
Locking Volume Control To One Mode
(Global Volume Lock)
2.
3.
Unlocking Volume Control For A Single Device (Individual Volume
Unlock)
1.
2.
3.
4.
5.
Unlocking All Volume Control (Restoring Default Setting)
NOTE: Performing these instructions will restore independent volume control for all pro-
grammed devices (e.g., TV volume control in TV mode, VCR volume in DVD/VCR mode,
etc.).
1.
2.
3.
Enter - - and then press any mode key once (e.g.,
9 9 3
The will blink twice.
LED
Now, when you press
the selected device (e.g.,
of the mode you have selected.
After performing
mode key where you want volume to be unlocked (e.g.,
) and controlled within its own mode.
DVD/VCR
Press and and hold
then release .
SET
Enter - - and then press
9 9 3
blink four times.
If desired, repeat steps 1 through 3 (of this section) for
each device that you want volume to be unlocked.
After selecting a device that has volume unlocked (e.g.,
), pressing
DVD/VCR
device's volume only in its own mode.
On the remote control, press and hold
light) blinks twice,then release
Enter - - and then press
9 9 3
blink four times.
Volume will again be independently controlled according
to its default states for all programmed devices.
L M
,
VOL VOL
) will be controlled, regardless
TV
Global Volume Lock
until the
SET LED
VOL
L M
, , or
VOL VOL
SET
VOL
13
, or , the volume of
MUTE
(above),press a desired
(red light) blinks twice,
M
once. The
LED
will control the
MUTE
until the
SET
.
L
once. The
LED
).
TV
will
(red
LED
will