Major Components - Acer AcerAltos 19000 User Manual

There are two SCSI backplane boards standard in the AcerAltos 19000. This
section gives a brief description of the boards. Refer to Appendix B for a detailed
discussion, including information about backplane board major components,
jumper settings, hard disk ID feature, and channel configurations (single- and
dual-channel).
The SCSI backplane boards provide a convenient interface between the SCSI
drives and the system board. Each board includes seven SCSI drive slots to
accommodate the drive trays, two SCSI channels to connect to the system board
or SCSI controller board, and one SCSI channel out for external devices.
Each backplane board has the following major features:
"Hot-swap" feature that allows replacement of a defective hard drive even
while the system is in full operation. This feature requires a RAID controller
board and RAID drivers.
Indicates hard disk drive failure through a front panel board LED
Supports wide SCSI disk drives
Each backplane board can be configured as 'split' (2-channels) (default) or
combined into a single SCSI channel
SCSI ID strapping that allows wide SCSI HDD ID configuration through the
backplane instead of configuring individual drive IDs