Table of Contents
Advertisement
Aside from the self-test messages, you can determine if the system is in good
condition by checking if the following occurred:
Power indicator LED on the front panel lights up
Power, Num Lock, and Caps Lock LED indicators on the keyboard light up
If the system does not boot after you have applied power, check the following
factors that might have caused a boot failure.
The pointing symbol ( ☛ ) indicates a possible cause of the problem. The check
mark ( ✔ ) tells you how to correct the problem.
☛ ☛
✔
Insert the front panel key and turn it counter-clockwise until it points to the
unlocked icon. See Figure 2-6.
☛ ☛
✔
Check the power cable connection from the power source to the power socket
on the rear panel. Make sure that the cable is properly connected.
☛ ☛
✔
Have an electrician check your power outlet.
☛ ☛
✔
Close the panel door(s) completely.
Advertisement
Table of Contents
