Table of Contents
Advertisement
This selection is highlighted when you first enter the main menu. It gives an
overview of how to configure your computer with the EISA Configuration Utility.
Press Enter to select this item. Then press the up and down arrow keys to move
up or down the text. When you select Step 1: Important EISA Configuration
Information, the following screen displays:
Step 1: Important EISA configuration information
Welcome
to
EISA
>Next=ENTER<
Take a few moments to read all seven screens in this step. The screens provide
details about using the ECU program to configure EISA and ISA boards. You can
learn how to determine if a board is EISA or ISA and how to use steps 2, 3, and 4
on the ECU main menu. The last screen in the series summarizes the steps to
follow when configuring your computer.
You can move between screens by pressing Enter to go to the next screen, or F9 to
go back to the previous screen. After viewing the screens, press Enter or F10 to
return to the ECU main menu.
Your new EISA computer requires a
new approach to configuration.
Please take just a few minutes to
read all of the screens in this
step (Step 1) for more information.
You may return to these screens at
any time by pressing F1 and
selecting 'EISA configuration'
from the help menu.
Press ENTER to continue.
<Previous=F9>
<Done=F10>
Advertisement
Table of Contents
