Media Sizes Supported In Each Mode - Samsung SCX-6555NX Series User Manual

Media sizes supported in each mode

MODE
Copy mode Letter, A4, Legal,
Oficio, Folio,
Executive, JIS B5, A5,
A6
Single side printing All sizes supported by
the machine
Letter, A4, Legal, Folio,
a
Duplex printing
Oficio, JIS B5, ISO B5,
Executive, A5,
Statement
Letter, A4, Legal
b
Fax mode
a. 75 to 90 g/m (20 ~ 24 lb) only
2
b. Only the optional fax kit is installed.
Downloaded From ManualsPrinter.com Manuals
SIZE SOURCE
• tray 1
• optional tray 2
• multi-purpose tray
• high capacity feeder
• tray 1
• optional tray
• multi-purpose tray
• high capacity feeder
• tray 1
• optional tray
• multi-purpose tray
• high capacity feeder
• tray 1
• optional tray
• high capacity feeder
Guidelines for special print media
MEDIA TYPE
Envelopes • Successful printing on envelopes depends upon the
quality of the envelopes. When selecting envelopes,
consider the following factors:
- Weight: The weight of the envelope paper should
not exceed 90 g/m
- Construction: Prior to printing, envelopes should
lie flat with less than 6 mm curl, and should not
contain air.
- Condition: Envelopes should not be wrinkled,
nicked, or otherwise damaged.
- Temperature: You should use envelopes that are
compatible with the heat and pressure of the
machine during operation.
• Use only well-constructed envelopes with sharp and
well creased folds.
• Do not use stamped envelopes.
• Do not use envelopes with clasps, snaps, windows,
coated lining, self-adhesive seals, or other synthetic
materials.
• Do not use damaged or poorly made envelopes.
• Be sure the seam at both ends of the envelope
extends all the way to the corner of the envelope.
• Envelopes with a peel-off adhesive strip or with
more than one flap that folds over to seal must use
adhesives compatible with the machine's fusing
temperature for 0.1 second. Check your machine's
specification to view the fusing temperature, see
page see "General specifications" on page 113. The
extra flaps and strips might cause wrinkling,
creasing, or jams, and may even damage the fuser.
• For the best print quality, position margins no closer
than 15 mm from the edges of the envelope.
• Avoid printing over the area where the envelope's
seams meet.
36
GUIDELINES
2 or jamming may occur.
1 Acceptable
2 Unacceptable