Specifications - Toro GrandStand 74534 Operator's Manual

With 36in or 40in turbo force cutting unit
Hide thumbs Also See for GrandStand 74534:
Table of Contents

Advertisement

1. Safety interlock symbols
2. Battery light
Speed Control Lever
This machine has a variable speed control. This controls
how fast or slow the machine will travel with the motion
control levers pushed all the way forward.
Note: The numbers next to the speed control are
an approximate maximum miles per hour (mph) the
machine will travel.
Throttle Control
The throttle control is variable between Fast and Slow.
Choke
Use the choke to start a cold engine.
Blade Control Switch (PTO)
The blade control switch (PTO) is used to engage
the electric clutch to drive the mower blades with the
right side motion control lever in the center, un-locked
position. Pull the switch up to engage the blades and
release. To disengage the blades, push the blade control
switch (PTO) down or move or release the right side
motion control lever into the neutral lock position.
Ignition Switch
This switch is used to start the mower engine and has
three positions: Off, Run and Start.
Motion Control Levers
The motion control levers are used to drive the machine
forward, reverse, and turn either direction.
Fuel Shut-off Valve
Close the fuel shut-off valve (located behind the
operator cushion on the right hand side of fuel tank)
when transporting or storing the mower.
Figure 5
3. Hour meter
Attachments/Accessories
A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.

Specifications

Note: Specifications and design are subject to change
without notice.
36 inch mowers:
Width with deflector down
Length with platform down
Length with platform up
Height
Weight
40 inch mowers:
Width with deflector down
Length with platform down
Length with platform up
Height
Weight
13
51.62 inches (131.1 cm)
74 inches (188 cm)
61 inches (155 cm)
48 inches (121.9 cm)
756 (343 kg)
55.75 inches (141.6 cm)
70 inches (177.8 cm)
57 inches (144.8 cm)
48 inches (121.9 cm)
773 (350.6 kg)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grandstand 74536Grandstand 79534Grandstand 79536

Table of Contents