Sagem DTR94 HD Freesat User Manual page 14

UG 253271393-A DTR94 HD Freesat UK.book Page 10 Mardi, 6. octobre 2009 10:03 10
4-2-2 Connection to a High-Definition television using the component video link (Y Pb Pr)
1. Connect the YPbPr connectors (red, blue and green) of your receiver to the YPbPr connectors on
your television set, respecting the connectors colour (cable not supplied).
2. Connect the right and left audio outputs of your receiver to the audio inputs on your television set
or your Hi-Fi system (cable not supplied).
Make sure to connect an audio device (TV set or Hi-Fi) otherwise there will
be no sound output.
3. To connect other devices to the receiver (VCR, home cinema...), refer to the following pages.
4. Connect the power adapter to the power cable. Then, connect the power cable into the 12V
connector on the receiver.
5. Plug the power cord into the wall socket.
- 10 -