Factory Preset; Display Mode; Monitor Info - NEC MultiSync LCD1850E User Manual

RESOLUTION NOTIFIER
This optimal resolution is 1280 x 1024. If ON is
selected, a message will appear on the screen after
30 seconds, notifying you that the resolution is not at
1280 x 1024.

FACTORY PRESET

Selecting Factory Preset allows you to reset all OSM
control settings back to the factory settings. Individual
settings can be reset by highlighting the control to be
reset and pressing the RESET button.
Information

DISPLAY MODE

Provides information about the current resolution
display and technical data including the preset timing
being used and the horizontal and vertical frequencies.
Increases or decreases the current resolution.

MONITOR INFO

Indicates the model and serial numbers of your monitor.
OSM Warning
OSM Warning menus disappear with Exit button.
NO SIGNAL: This function gives a warning when there
is no Horizontal or Vertical Sync Signal present. After
power is turned on or when there is a change of input
signal or video is inactive, the No Signal window will
appear.
RESOLUTION NOTIFIER: This function gives a
warning of use with optimized resolution. After power is
turned on or when there is a change of input signal or
the video signal doesn't have proper resolution, the
Resolution Notifier window will open. This function
can be disabled in the TOOL menu.
OUT OF RANGE: This function gives a
recommendation of the optimized resolution and refresh
rate. After the power is turned on or there is a change of
input signal or the video signal doesn't have proper
timing, the Out Of Range menu will appear.
01b_English
English-12
12 31/10/01, 12:38 pm