Product Overview; Controls - Toro 74142TE Operator's Manual

Product Overview

5
4
3
2
1
11
1. Height-of-cut deck-lift
pedal
2. Transport lock
3. Parking-brake lever

4. Controls

5. Motion-control levers
6. Roll bar
Controls
Become familiar with all the controls before you start the
engine and operate the machine
2
1
G017418
1. PTO Switch
2. Choke
3. Throttle control
Hour Meter
The hour meter records the number of hours the engine has
operated. It operates when the engine is running. Use these
times for scheduling regular maintenance
6
7
8
9
10
G020562
Figure 4
7. Seat belt
8. Fuel cap
9. Mower deck
10. Caster wheel
11. Z Stand
(Figure 4 and Figure
3
4
Figure 5
4. Hour meter
5. Ignition switch
6. Fuses
(Figure 5).
Throttle Control
The throttle control is variable between Fast and Slow.
Choke
Use the choke to start a cold engine. Pull the choke knob up
to engage it.
Blade-Control Switch (PTO)
Use the blade-control switch (PTO) to engage the electric
clutch and drive the mower blades. Pull the switch up to
engage the blades and release. To disengage the blades,
push the blade-control switch (PTO) down or move a
motion-control lever into the N
Ignition Switch
This switch is used to start the mower engine and has 3
positions: Start, Run and Off.
Motion-Control Levers
Use the motion-control levers to drive the machine forward
and reverse and to turn either direction.
Neutral-Lock Position
Use the N
EUTRAL
system to engage and to determine the N
5).
Fuel-Shutoff Valve
5
Close the fuel-shutoff valve (under the seat) when
transporting or storing the mower.
Attachments/Accessories
A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
6
13
-
EUTRAL LOCK
- position with the safety-interlock
LOCK
EUTRAL
position.
position.