Product Overview; Controls; Throttle Control; Gear Shift Lever - Toro 30672 Operator's Manual

Product Overview

1. Side discharge
2. Mower deck
3. Recoil starter
4. Gas tank

Controls

Become familiar with all the controls (Figure 5) before you
start the engine and operate the machine.
G017539
Figure 4
5. T-bar control
6. Handle
7. Front caster wheel

1. Throttle control

2. Blade control bail
3. Power take off lever (PTO) 9. Ignition switch

4. Gear shift lever

5. Upper control bar
6. Lower control bar
Throttle Control
The throttle control has two positions: Fast and Slow.
Blade Control Bail
The bail is used in conjunction with the blade control lever
(PTO) to engage the clutch and drive the mower blades.
Releasing the blade control bail will stop the engine with the
PTO engaged.
Blade Control Lever (PTO)
This lever is used in conjunction with the blade control bail
to engage and disengage the mower deck belt and drive the
mower blades.
Gear Shift Lever
The transmission has five forward speeds, neutral and reverse,
and has an in-line shift pattern.
Important: Do not shift while unit is moving, as
transmission damage may occur.
11
Figure 5
7. Parking brake
lever-released position
8. Choke
10. Upper handle
11. Lower handle