Table of Contents
Advertisement
Replacing the Fuel Filter
Service Interval: Every 200 hours/Yearly (whichever comes
first)
Never install a dirty filter if it is removed from the fuel line.
Note: Note how the fuel filter is installed.
Note: Wipe up any spilled fuel.
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3. Close fuel shut-off valve at fuel tank
Note: Remove the fuel line from the fuel valve that is
closest to the engine.
4. Squeeze the ends of the hose clamps together and slide
them away from the filter
Figure 32
1. Hose clamp
2. Fuel line
5. Remove the filter from the fuel lines.
6. Install a new filter and move the hose clamps close to
the filter.
7. Open fuel shut-off valve at fuel tank
8. Check for fuel leaks and repair if needed.
(Figure
31).
(Figure
32).
3. Filter
(Figure
31).
Electrical System
Maintenance
Servicing the Fuse
The electrical system is protected by a fuse. It requires no
maintenance. If the fuse blows, check the component or the
circuit for malfunction or a short. To replace the fuse, pull
out the fuse
(Figure
33) to remove it and insert a new fuse.
1. Fuse, 7.5 amp, blade type
27
Figure 33
Advertisement
Table of Contents
