Installing The Fuse; Product Overview; Charging The Battery - Toro 20655 Operator's Manual

3. Installing the Fuse

Model 20656 only
Your mower comes with a 40-amp fuse that protects the
electric starter.
Important: You cannot start the mower with the
electric starter or charge the battery unless you install
the fuse.
1. Unclip both ends of the battery cover and remove it
(Figure 7).
Figure 7
2. Install the fuse in the fuse holder as shown (Figure 8).
Figure 8
Note: Your mower comes with a fuse in your owner's
packet and another fuse in the battery box.
3. Install the battery cover.

4. Charging the Battery

Model 20656 only
Refer to Charging the Battery.

Product Overview

Figure 9
1. Cutting height lever
2. Oil ll/dipstick
3. Recoil start handle
4. Blade control bar
5. Ignition key (model 20656
only)
Figure 10
1. Grass bag
2. Side discharge chute
6
6. Fuel tank cap
7. Battery (model 20656 only)
8. Air lter
9. Primer
10. Spark plug
3. Battery charger (model 20656
only)
4. Rear discharge plug (installed)