Starting The Engine; Stopping The Engine - Toro 23515 Operator's Manual

4. Install the fuel-tank cap and wipe up any spilled
gasoline.

Starting the Engine

1. Connect the wire to the spark plug.
2. Open the fuel valve by turning it in-line with the fuel
hose (Figure 9).
1. Fuel filter
3. Move the throttle control all the way forward to the
C position (Figure
HOKE
Note: Do not use the choke when the engine is warm.
1. Throttle control
1
2
g017588
Figure 9
2. Fuel valve—O
FF
9).
1
g016910
Figure 10
4. Pull the starter handle lightly until you feel resistance,
then pull it sharply. Allow the rope to return to the
handle slowly.
5. When the engine starts, move the throttle control to
the F
Note: The throttle setting governs the maximum drive
speed of the aerator.

Stopping the Engine

1. Release the traction control lever and allow it to return
to N
EUTRAL
2. Move the throttle lever all the way rearward to stop
the engine.
position
12
position.
AST
.